Why ISRO Is Building Space Stations Piece by Piece Instead of One Giant Rocket
The heaviest thing ISRO has ever launched weighed about 10 tonnes. The International Space Station weighs 420 tonnes. That gap is not a failure of ambition, it is the reason every serious space agency, including NASA, Roscosmos, and now ISRO, has arrived at the same conclusion: you do not build a rocket big enough to lift a space station. You build the skill to assemble one in orbit.
The Docking Problem Comes First
Orbital docking is the prerequisite for everything else. Two spacecraft travelling at roughly 28,000 kilometres per hour must find each other, match velocities to within centimetres per second, and physically connect, without a crew on the ground able to intervene in real time. ISRO demonstrated this capability in January 2025, when SpadEx, the Space Docking Experiment, successfully docked two small uncrewed spacecraft in low Earth orbit. India became only the fourth country to achieve orbital docking, after the United States, Russia, and China. The mission used two 220-kilogram spacecraft launched together on a PSLV, then separated and brought back together autonomously. The technology validated is not ceremonial. Without docking, a crewed lunar mission requires a single rocket powerful enough to carry everything: lander, ascent vehicle, service module, crew capsule. With docking, you can launch components separately and join them in orbit, which is exactly how Apollo worked and how Artemis is working now.
Why Refuelling Changes the Economics Entirely
A rocket burns most of its propellant just getting to orbit. The spacecraft that arrives there is already close to empty. If that spacecraft needs to travel further, to the Moon, to a Lagrange point, to a higher orbit, it must carry all the fuel for that second leg from the ground, which means a heavier rocket, a more expensive launch, and a smaller payload. Orbital refuelling breaks that constraint. A depot in low Earth orbit, resupplied by smaller tanker flights, can top up a spacecraft before it departs for deep space. The depot itself does not need to be launched in one piece. It can be assembled from modules, each within the lift capacity of a rocket ISRO already has or is developing. LVM3, the rocket that placed Chandrayaan-3 on its lunar trajectory, can put about 10 tonnes into low Earth orbit. That is a usable module mass. The next-generation vehicle under Gaganyaan's long-term roadmap pushes that ceiling higher, but the architecture does not wait for the bigger rocket. It is designed so that progress is possible with the fleet that exists.
Orbital Assembly and the Bharatiya Antariksha Station
ISRO has announced a target of establishing the Bharatiya Antariksha Station, India's own space station, by 2035. The station is not conceived as a single structure launched whole. It will be built up in modules, each docked to the last, which is exactly the construction method used for the ISS and China's Tiangong. The first module is expected to weigh around 20 tonnes. Subsequent modules add habitation volume, science bays, and docking ports for visiting crew and cargo vehicles. The Gaganyaan crewed capsule, which has already completed uncrewed test flights, is the vehicle that carries astronauts to and from the station. Shubhanshu Shukla, the ISRO astronaut selected for the Axiom Space mission to the ISS, will gain direct operational experience aboard an orbital station before India's own is complete, a deliberate knowledge transfer built into the programme schedule.
What This Architecture Requires ISRO to Master
Docking and refuelling are not the only new capabilities this approach demands. Autonomous rendezvous, spacecraft finding each other without ground control steering them together in real time, is one. Cryogenic propellant storage in orbit is another: liquid hydrogen and liquid oxygen boil off slowly in the thermal environment of space, and keeping them stable for weeks or months requires insulation and active cooling systems that no Indian spacecraft has yet carried. Robotic arm technology for handling modules during assembly is a third. ISRO has identified all three as development priorities. The SpadEx mission addressed rendezvous and docking. Cryogenic storage work is ongoing under the CE20 engine programme and its derivatives. The robotic systems are further out. None of this is unique to India, NASA spent decades on each of these problems, but the sequencing matters. ISRO is not trying to solve everything at once. It is building a dependency chain and working along it.